Page Contents
Details: Fetcoi 12inch Manual Push Reel Lawn Mower, Push Lawn Leaf Grass Push Lawn Sweeper with 23L Collection Bag, 5 Blades, Grass Catcher for Small to Medium Yards
Brand: Fetcoi
DescriptionComposed of 65 manganese steel, plastic, and other materials, the mower is durable and can save your use cost. Five blades and 12inch mowing width can improve its working efficiency and give you a smooth and beautiful lawn in a short time. The product is also easy to clean and install, and we believe it will be a good assistant in your work.Details Handle: The sponge is set at the handle, which not only plays the role of anti-skid but also can better protect your hands and reduce soreness.Grooves: There are many grooves on the wheel surface to prevent slipping, so you can easily push the wheel on the grass.U-shaped Tube: The thickened tube is fixed with screws, making the tube not easy to fall off and having a long service life.ApplicationThe lawn mower has 12inch cutting width and can cut 17-33mm/0.67 -1.3inch height of grass, and can be widely used for picking up leaves, grass and debris on lawns, sidewalks, driveways, courtyards and sidewalks.SpecificationMaterial of Blade: 65 Manganese SteelMaterial of Bag: Mesh Cloth and PUMaterial of Pole: Galvanized PoleMaterial of Wheel: PlasticColor: Black, GreenPower Source: ManualStyle: Manual Push Reel Lawn MowerCutting Width: 300mm/12 inchCutting Height Adjustment: 17-33mm/0.67 -1.3inchCollection Bag Capacity: 6 gallon / 23LNet Weight: 6.9kg/15.22lbsGross Weight: 7.4kg/16.31lbsPackage Size: 48*38*22.5cm/18.9*14.96*8.56inchWheel Diameter: 27cm / 10.62inchDistance between Two Wheels: 46cm/18.11inchLength of Tube: 1.2m/3.93ftPackage Included1 *Lawn Mower1 * U-shaped Tube1* Collecting BagAll Accessories for InstallationNotesThis product is not suitable for collecting rocks, nuts, pinecones or wet debris.
Advantages
- Products can be returned
- Make sure this fits by entering your model number.
- Exquisite Material: The blade of the lawn mower is made of 65 manganese steel, the wheel is made of plastic, the pole is made of galvanized pole, and the bag is made of mesh cloth and PU, making the product stable, not easy to rust and deform. You can use it for a long time without frequent replacement, saving your cost to a certain extent.
- High Working Efficiency: This lawn mower is equipped with 5 blades, and the cutting width can reach 300mm/12inch. Under the same lawn area, it takes less time to weed, so you can get a smooth and tidy lawn in a short time with low noise.
- Large Capacity: The capacity of the bag with a sling is about 23L/6gallon, which can collect more grass at one time, so you can use it for a long time without frequently removing weeds in the bag.
- User-friendly Design: You can directly stand and push the machine to mow without bending, reducing the burden on the waist due to long time work.
Notice
- Is an online purchase
- Delivery may be delayed in some areas.
Buyer Guide Walk-Behind Lawn Mowers
A 3D scanner is a machine that allows objects to be scanned, scanned, and then reconstructed into 3D images.- Laser scanner: This scanner, which works by capturing light, is the most accurate of the three types but is the most expensive.
- 3D camera: This scanner, which uses light, is less expensive but less accurate.
- Projection scanner: This is often the least expensive, but is the least accurate of the three.
- Low-cost scanners: These scanners are often used in education, but aren’t very accurate.
- High-precision scanners: These scanners are the most accurate, but tend to be expensive.
- Speed: Before buying, make sure you understand how quickly the scanner can scan an object.
- Resolution: The resolution of the scanner refers to the number of pixels in the scan.
- Accuracy: Accuracy refers to how close the scan is to the real object.
- Portability: The scanner’s portability refers to how portable it is.
- Cost: The scanner’s cost refers to how much it will cost you to buy.
- Software: Finally, the software that comes with the scanner refers to the type of software you can use.
How to choose Walk-Behind Lawn Mowers
If you work in an engineering group, choosing a 3D scanner can be tricky. There are a variety of different types of 3D scanners available, and choosing one requires a bit of research and consideration.- Magnetic or laser scanning? Magnetic scanning uses a focused magnetic field to create a 3D scan of the object. Laser scanning uses light or other electromagnetic radiation to create a point cloud of the object’s surface.
- What type of data is scanned? Most scanners offer at least one type of data a two-dimensional (2D) height map, a texture map, a point cloud, or a mesh model. When scanning an object with a 3D scanner, you should decide which type of data is the most important to you and your project.
- Do you need to texture your scan? If youre scanning an object with a rough, rough texture, you might not need to create a mesh model. However, if youre scanning an intricate object, such as an intricate piece of jewelry, you might need to create a mesh model of the object.
- How much money can you afford to spend? 3D scanners can cost anywhere from $300 to over $10,000. How much are you willing to spend?
- Do you need to scan an object with a non-planar surface? If the surface of an object is curved, your scanner should be able to scan the object. Most scanners wont scan an object with curved surfaces. Some scanners have a curved surface option so that an object can be scanned in a curved manner.
How to maintain Walk-Behind Lawn Mowers
If youre the owner of a 3D scanner, its important to know how to properly maintain it. Just like other machines, 3D scanners do require a bit of maintenance. Otherwise, they will start to malfunction.- Keep it clean. While its possible to clean your 3D scanner yourself, its more effective if you hire a professional to clean your scanner for you. Dirt and dust can easily clog your 3D scanner, leading to performance issues.
- Adjust your scanners settings. Your 3D scanner is programmed for optimal performance, so you dont want to damage your scanner by exposing it to too much heat or cold. To adjust your scanners settings, youll need to unscrew the scanners lid and use the manufacturers manual to adjust the settings accordingly.
- Tighten your screws. Sometimes, the screws that hold your 3D scanner together can become loose. To tighten your screws, use a pair of pliers or a pair of needle-nose pliers.
- Keep spare parts on hand.